An independent reference about QR codes: how they work and how to use them safely. It does not create codes or accept payments and is not connected with the former site on this domain.

Problems

Troubleshooting: when a code won't scan or leads somewhere wrong

Most of the time a QR code fails to scan not because it's broken but because of small things: glare, a camera held too close, printing that's too light or a cropped blank border. The opposite happens too: the code scans but leads to a page that no longer exists. Below we've gathered the most common situations and explained what to check first. Most problems take a minute to solve, and if the code is yours, a fix before the next print run.

Before blaming your phone, take a step back: the camera often needs to see the whole square along with its blank border.

— Editor's note

How this section works: possible causes are listed in general terms, without mentioning phone models or programs. If the code still won't scan after all the steps, try another phone: that will show whether the problem is the code or the camera.

Common situations

The camera can't see the code

Wipe the lens, move the phone back so the whole square fits in the frame and wait a couple of seconds. Check whether code scanning is turned on in the camera settings. If the code is very small or the print is faint, the camera may simply not have enough detail.

The code scans but the link won't open

Look at the address in the prompt: it may contain a typo or an extra space, or be cut off. Check that your phone is online. If the address looks right but the page still won't open, it may have been removed from the site.

The printed code won't scan

The usual culprits are a size that's too small, faint ink, modules that bled on porous paper or a cropped quiet zone. Make the code bigger, print dark on light on heavy matte paper and leave a blank margin around the square.

The code on a screen glares

Turn up the brightness of the screen showing the code and tilt it so the reflection of a lamp or window moves aside. If the code is on a monitor, step back and try at an angle. A glossy screen protector can get in the way more than you'd think.

The code leads somewhere wrong

If the address in the prompt isn't what you expected, don't open it. Check whether another code has been stuck over the genuine one. Let the owner of the venue or notice know, and find the site you need yourself.

Old codes stopped working after the site moved

A static code stores the address inside it, so if the page has moved, the square still points to the old address. The site owner should set up a redirect from the old address to the new one, and the printed codes will work again. If that's not possible, the codes will have to be reprinted.

If a code won't scan

  1. Check the lens and the light

    Wipe the camera and make sure there's enough light but no direct glare on the code. In dim light, turning up the screen brightness or shining a torch from the side helps.

  2. Get the whole square in view

    Move the phone back so the whole code with its blank border is in the frame. Hold the camera straight over the square and keep it still until the prompt appears.

  3. Check the camera settings

    Find the code-scanning option in the camera settings and turn it on. If there's no such option, look for a built-in code reader elsewhere on your phone.

  4. Look at the code itself

    Are there stains, scratches, folds or torn edges? Error correction helps with minor damage, but not when the corner squares or a large part of the pattern are affected.

  5. Try another phone

    If another phone can't read the code either, the problem is most likely the code itself. If it can, the issue is your camera: update the system or clean the lens.

  6. Type the address yourself

    If there's a short link next to the code, just type it in. If there's no link and the code is yours, add one the next time you print — it will help other people too.

  • Guides

    Step-by-step guides: codes for your home network, a business card, a menu or a notice, and checking the content before printing. Plus the article catalogue.

  • Tools

    What comes in handy: your phone camera, the address preview, a text editor, a printer with heavy paper, a ruler and a short link next to the code.

  • Comparisons

    How a QR code differs from a barcode and a short link, a static code from a dynamic one, and a printed code from one shown on a screen.

  • Security

    Stickers over genuine codes, messages asking you to pay urgently, fake sign-in pages and other tricks, and how to recognise them.

  • Glossary

    Key terms in plain words: module, finder pattern, quiet zone, error correction, static and dynamic codes, phishing.

Sources

  • Reference materials on the ISO/IEC 18004 standard
  • Editorial materials of this guide

This guide describes working with QR codes in general terms and is accurate as of the preparation date shown on each page. Phone cameras and code-making programs get updated, and their menus look different from device to device. If the prompts on your screen don't match our description, follow the purpose of each step and check your phone's own help pages.